Effect of laser shock peening on stress corrosion cracking of TC4/2A14 dissimilar metal friction stir welding joints

Stress corrosion cracking (SCC) of welded joints is a significant issue that affects the widespread application of multimetal welded structures in aerospace, transportation, and other fields. This paper investigates the effect of laser shock peening (LSP) on the SCC of TC4/2A14 friction stir welded (FSW) joints with dissimilar metals. The microstructural evolution, mechanical properties, and corrosion behavior with and without LSP treatment were investigated using optical microscopy, transmission electron microscopy, X-ray analysis, electrochemical testing, and slow strain rate tensile testing (SSRT). The results showed that the LSP significantly refined the grains and induced work-hardening on the near-surface of the material. After LSP, the compressive residual stresses on the surface of the titanium and aluminium sides were −817.6 MPa and −153.6 MPa for the joint, respectively. Corrosion resistance was also improved, with the self-corrosion current density on the Al side of the joints reduced by 77% and the SCC susceptibility index (Issrt) reduced from 0.140 to 0.121. The enhanced SCC resistance of the LSP-treated TC4/2A14 dissimilar metal FSW joints is primarily due to grain refinement, work-hardening effect, and high-level compressive residual stress. These factors not only enhance the material strength and improve the pitting resistance of the joints but also prevent the initiation and propagation of SCC.