方位(导航)
推力
球(数学)
机械工程
材料科学
陶瓷
汽车工程
工程类
转速
推力轴承
可靠性(半导体)
喷气发动机
功率(物理)
复合材料
计算机科学
数学分析
量子力学
人工智能
物理
数学
作者
Peter Gloeckner,Matthias Martin,Michael Flouros
标识
DOI:10.1080/10402004.2016.1262930
摘要
Next-generation aircraft engines will have to face more stringent requirements for reliability, thrust to weight, efficiency, environment protection, and profitability. These requirements affect all engine modules and components, including rolling element bearings. To cope with the above-mentioned requirements, next-generation aircraft engine main shaft bearings will operate under higher loads, speeds, and temperatures and increased reliability. In addition, lighter weight components are desirable. Hence, new material and cooling technologies including weight- and stress-optimized designs need to be developed.In this article, the experimental investigation results of a novel main shaft ball bearing featuring ceramic balls, direct outer ring cooling, squeeze film damping, as well as surface-nitrided raceways are presented. Bearing rig testing under typical aircraft engine flight conditions has been performed. Savings for oil flow quantity of more than 45% and for power loss of more than 15% were identified. Outer ring temperature reductions of more than 20 K were achieved due to the use of ceramic ball material and the direct outer ring cooling concept. The ultra-high-speed capability of the bearing was demonstrated. Rotational speeds of 24,000 rpm were achieved at bearing temperatures below 200°C. The fundamental experimental results including oil and bearing temperature distribution, power dissipation, and bearing efficiency are presented. In addition, experimental power loss and temperature results are compared with data for a conventional all-steel bearing.
科研通智能强力驱动
Strongly Powered by AbleSci AI