The method of numerical simulation in combination with experiment was adopted to anˉalyze a typical hydromatic bulging process of the thin-walled tube.The change rule of stainless steel tube,with different length and with tube end either fixing or free,in the variation of the thickness,the profile and the forming limit in deformation zones was obtained.The reason of regular variation of deformation parameters due to the change of stainless steel tube length was analyzed.Comparison was made between experiment data and numerical simulation data resulted from DYNAFORM softˉware.The reason for the production of the error was analyzed.The application of optimal numerical simulation to counter compute material parameter and get more close and authentic result to the experiment was presented.The research work has certain consulting and referring value in imˉproving the numerical simulation method.