钙钛矿(结构)
材料科学
光电子学
化学物理
化学工程
工程物理
化学
物理
工程类
作者
Lyubov' Anatol'evna Frolova,Lavrenty Gennady Gutsev,Bala R. Ramachandran,Nadezhda N. Dremova,Sergey M. Aldoshin,Pavel Anatol'evich Troshin
标识
DOI:10.1016/j.cej.2021.131754
摘要
• Alloying CsPbI 3 with FAI yields new promising low-dimensional Cs 2 FAPb 2 I 7 absorber. • Cs 2 FAPb 2 I 7 absorber shows narrowed bandgap of 1.62 eV as compared to CsPbI 3 (1.7 eV). • Thin films of Cs 2 FAPb 2 I 7 show outstanding photochemical stability. • Cs 2 FAPb 2 I 7 delivers PCE ~ 13% and stable operation for >1200 h in solar cells. • DFT modeling explain superior optoelectronic properties and stability of Cs 2 FAPb 2 I 7 . Among inorganic lead halide perovskites, cesium lead triiodide (CsPbI 3 ) is considered the most promising for photovoltaic applications. The material is a good absorber due to its narrow bandgap enabling efficient light harvesting; however, the low stability of the “black” photoactive phases of CsPbI 3 at low temperatures represents a major challenge for the practical application of this material. Herein, we report a new family of promising perovskite-like 2D absorber materials produced by alloying CsPbI 3 with formamidinium iodide (FAI). Using a set of complementary experimental techniques in combination with the density functional theory calculations we have found that the introduction of FAI as overstoichiometric additive to CsPbI 3 favors the formation of perovskite-like phases with reduced dimensionality and improved stability. The optimal CsPbI 3 ⋅xFAI (x = 0.5, 0.6) (~Cs 2 FAPb 2 I 7 ) material formulations do not undergo any phase transitions and do not show any signs of degradation upon continuous exposure to light for more than 1200 h. The observed high phase stability of the optimal CsPbI 3 -FAI alloys has been explained through DFT calculations by using criteria for thermodynamic stability. The perovskite solar cells based on Cs 2 FAPb 2 I 7 absorber material delivered light power conversion efficiency of ca. 13% and retained ~ 80% of the initial efficiency after 1200 h of continuous light soaking. The obtained results set new efficiency and stability records for the Cs-rich low dimensional perovskite-like absorber materials. Further exploration of the newly emerging family of 2D materials stemming from the CsPbI 3 -FAI and similar alloys will pave the way to the development of a new generation of efficient and stable perovskite solar cells.
科研通智能强力驱动
Strongly Powered by AbleSci AI