材料科学
泥浆
阳极
电解质
锂(药物)
电极
循环伏安法
相(物质)
容量损失
电池(电)
分析化学(期刊)
金属
锂离子电池
离子
电化学
液态金属
化学工程
复合材料
色谱法
冶金
化学
有机化学
热力学
物理化学
内分泌学
功率(物理)
工程类
物理
医学
作者
Yao Huang,Haijuan Wang,Yibin Jiang,Xunyong Jiang
标识
DOI:10.1016/j.matlet.2020.128261
摘要
As a new type of self-healing material, room-temperature liquid metal (LM) composed of Ga, In and Sn is a promising anode in lithium-ion batteries (LIBs). It is difficult to directly prepare an electrode slurry with pure LM. Here, the LM electrode slurry was successfully prepared by simple high-speed stirring method. The LM in the slurry was evenly distributed in the form of liquid particles (average size 100 {\mu}m) and no aggregation occurred. The initial discharge specific capacity of LM is 1148 mAh g-1, and the stable discharge specific capacity is 350 mAh g-1. Cyclic voltammetry measurements show that three pairs of obvious reduction peaks and oxidation occur in LM anodes at 0.37 V,0.67 V,1.02 V and 0.72 V,0.79 V,0.97 V. In the process of lithium insertion, the LM undergoes a liquid-solid phase transition, and when it is delithiated, it will be converted into a liquid phase. The SEI film consumed active lithium and electrolyte during the long cycle, resulting in loss of reversible capacity.
科研通智能强力驱动
Strongly Powered by AbleSci AI