碳酸铵
材料科学
抗坏血酸
柠檬酸
无机化学
水溶液
氧化物
氮化硅
傅里叶变换红外光谱
二氧化硅
粒子(生态学)
氮化物
化学工程
核化学
硅
化学
有机化学
纳米技术
冶金
食品科学
工程类
海洋学
图层(电子)
地质学
作者
Akshay Gowda,Jihoon Seo,Charith K. Ranaweera,Suryadevara V. Babu
标识
DOI:10.1149/2162-8777/ab8ffa
摘要
A previously developed aqueous cleaning solution (4.2 mol l−1 each of H2O2 and NH4OH) was found to be ineffective in cleaning oxide/nitride surfaces after contamination with ceria particles from slurries containing proline or citric acid. However, a cleaning solution consisting of 1 wt% ascorbic acid, 1 wt% ammonium carbonate and 50 ppm triton X-100 at pH 12, aided by ultrasonic cleaning, removed these ceria particles, even those as small as ∼30 nm, from both oxide and nitride surfaces with efficiencies >99% as determined by AFM imaging. Fourier transform infrared (FTIR) spectroscopy results indicated that ceria particles treated with these additives can also bind with oxide/nitride surfaces through Si–O–C and Si–O–H bonds, in addition to any Ce–O–Si, where the C and H atoms are from the additives adsorbed on the ceria particles. All these bonds are broken effectively by the nucleophilic attack of hydroxyl anions in the cleaning solution while triton X-100 in the cleaning solution reduces adhesion between the particles and the film surface and facilitates cleaning via a wetting mechanism. More importantly, ascorbic acid and ammonium carbonate prevent particle redeposition by complexing with the removed particles and blocking the active Ce3+ species on their surface.
科研通智能强力驱动
Strongly Powered by AbleSci AI