脱碳
冶金
材料科学
合金
碳纤维
体积流量
动力学
热力学
化学
复合材料
物理
复合数
量子力学
作者
Wenhe Wu,Rong Zhu,Zhizheng Li,Chunyang Wang,Guangsheng Wei
标识
DOI:10.1080/03019233.2021.1874623
摘要
The effect of smelting temperature and CO2 flow rate to decarburization kinetics between CO2 and liquid Fe-C alloy were investigated. The decarburization rate caused by CO2 increases with smelting temperature. Compared with low carbon condition (near 0.45 wt pct), the effect of temperature on decarburization rate is more significant under high carbon condition (near 3.5 wt pct). At high carbon content, the decarburization rate increases linearly with CO2 flow rate. And a CO2 decarburization kinetics model considering the influence of bubble diameter, bubble generation frequency, rising velocity and rate controlling step was established. When CO2 transfer in gas phase boundary layer is rate controlling step, the calculated data are in good agreement with the experimental data. It was also found that the effect of CO2 flow rate on the decarburization rate was mainly affected by the reaction surface area, but less on gas phase mass transfer coefficient in current experimental situations.
科研通智能强力驱动
Strongly Powered by AbleSci AI