Soft Chemistry Routes

插层(化学) 化学 碱金属 晶体化学 氧化还原 亚稳态 结晶学 晶体结构 金属 化学反应 反应性(心理学) 固态化学 无机化学 有机化学 病理 替代医学 医学
作者
C. N. R. Rao,Kanishka Biswas
出处
期刊:Wiley eBooks [Wiley]
卷期号:: 57-95 被引量:9
标识
DOI:10.1002/9781118892671.ch10
摘要

Topochemical Reactions A solid-state reaction is said to be topochemically controlled when the reactivity is controlled by the crystal structure rather than by the chemical nature of the constituents. The products obtained in many solid-state decompositions are determined by topochemical factors, especially when the reaction occurs within the solid without the separation of a new phase. In topotactic solid-state reactions, the atomic arrangement in the reactant crystal remains largely unaffected during the course of the reaction, except for changes in dimension in one or more directions. Orientational relations between the parent and the product phases are generally found. Many developments in solid-state chemistry owe much to the investigations carried out on MoO3 and WO3 (for example, crystallographic shear planes). Topochemical dehydration has been used for sometime to prepare new metastable solids (for example, the synthesis of Ti2Nb2O9 from HTiNbO5). This strategy has been extended to perovskites. Intercalation Chemistry Intercalation reactions of solids involve the insertion of a guest species (ion or molecule) into a solid host lattice without any major rearrangement of the solid structure. A variety of layered structures act as hosts. The general feature of these structures is that the interlayer interactions are weak while the intralayer bonding is strong. Alkali metal intercalation in dichalcogenides is achieved by direct reaction of the elements around 1070 K in sealed tubes. Alkali metal intercalation compounds with dichalcogenides form hydrated phases. Metal phosphorus trisulfides undergo redox intercalation reactions just as the dichalcogenides and also ion exchange reactions. Pillaring is another intercalation reaction that enables synthesis of metastable oxide material. Pillaring refers to intercalation of robust, thermally stable, molecular species that prop the layers apart and convert the two-dimensional interlayer space into micropores of molecular dimensions, similar to the pores in zeolites. Ion Exchange Reactions Ion exchange in fast-ion conductors such as β-alumina is well known. It can be carried out in aqueous as well as molten salt media conditions. Ion exchange in inorganic solids is a general phenomenon, not restricted to fast-ion conductors alone. Kinetic and thermodynamic aspects of ion exchange in inorganic solids were examined by England. Their results reveal that ion exchange is a phenomenon that occurs even when the diffusion coefficients are as small as ˜10-12cm2/s, at temperatures far below the sintering temperatures of solids. Ion exchange occurs at a considerable rate in stoichiometric solids as well. A variety of inorganic solids have been exchanged with protons to give new phases, some of which exhibit high protonic conduction. Ion exchange chemistry of layered metal chalcogenides is not explored much compared to that of metal oxides. These are by and large limited to alkali ion-containing transition metal dichalcogenides. Use of Fluxes Use of molten salts as reactive fluxes is a non-topochemical route that enables the synthesis of metastable phases, especially at intermediate temperatures (150 to 500 degrees Celsius) between those employed in the hydrothermal route and the conventional ceramic route. Strong alkaline media, either in the form of solid fluxes or molten (or aqueous) solutions, enable the synthesis of novel oxides. The alkali flux stabilizes higher oxidation states of metals by providing an oxidizing atmosphere. Alkali carbonate fluxes have been traditionally used to prepare transition metal oxides such as LaNiO3 with Ni in the +3 state. A good example of an oxide synthesized in a strongly alkaline medium is the pyrochlore, Pb2(Ru2-xPbx)O7-y, where Pb is in the +4 state. This oxide is a bifunctional electrocatalyst. The procedure for preparation involves bubbling oxygen through a solution of Pb and Ru salts in strong KOH at 320 K. Sol–Gel Synthesis The sol-gel method has provided a very important means of preparing inorganic oxides. It is a wet chemical method and a multistep process involving both chemical and physical processes such as hydrolysis, polymerization, drying and densification. Important features of the sol-gel method are better homogeneity compared to the traditional ceramic method, high purity, lower processing temperature, more uniform phase distribution in multicomponent systems, better size and morphological control, the possibility of preparing new crystalline and non-crystalline materials and, lastly, easy preparation of thin films and coatings. The six important steps in sol-gel synthesis include: hydrolysis, polymerization, gelation, drying, dehydration and densification. The sol-gel technique has been used to prepare sub-micrometer metal oxide powders with a narrow particle size distribution and unique particle shapes. Electrochemical Methods Electrochemical methods have been employed to advantage for the synthesis of many solid materials. Typical materials prepared in this manner are metal borides, carbides, suicides, oxides and sulfides. Vanadate spinels of the formula MV2O4 as well as tungsten bronzes A5WO3 have been prepared by the electrochemical route. Electrochemical oxidation has been employed to prepare oxygen-excess La2CuO4 and other related materials. Thin films of BaTiO3 and lead zirconate titanate have been prepared by cathodic reduction. Intercalation of alkali metals in host solids is readily accomplished electrochemically. Hydrothermal, Solvothermal and Ionothermal Synthesis In recent years, hydrothermal synthesis has been employed to prepare various inorganic materials such as metal oxides, chalcogenides, metal-organic frameworks, porous materials and nanomaterials. Hydrothermal high-pressure synthesis under closed system conditions has been employed for the preparation of higher-valence metal oxides. Solvothermal synthesis is similar to hydrothermal synthesis but uses organic solvents such as toluene, decalin and octadecene instead of water. Solvothermal reactions have been extensively employed to prepare inorganic nanocrystals. In solvothermal synthesis, the size and shape of nanocrystals are controlled by the concentration of precursors and the reaction temperature. Ionothermal synthesis involves the use of an ionic liquid as the solvent in the synthesis of novel inorganic compounds.

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
QQ完成签到,获得积分10
刚刚
露露发布了新的文献求助10
刚刚
1秒前
小小怪夏士完成签到,获得积分10
1秒前
青菜发布了新的文献求助10
1秒前
修狗狗完成签到,获得积分10
1秒前
自由文博的应助被Fun_112采纳,获得30
2秒前
2秒前
cfs完成签到,获得积分10
3秒前
zhoudongxue完成签到 ,获得积分10
3秒前
3秒前
3秒前
amengptsd完成签到,获得积分10
3秒前
QQ发布了新的文献求助10
3秒前
WF发布了新的文献求助20
4秒前
hy发布了新的文献求助10
4秒前
MAX发布了新的文献求助10
5秒前
黄梓涵完成签到,获得积分10
5秒前
Atlantis30发布了新的文献求助10
5秒前
6秒前
自由文博的应助被Fun_112采纳,获得30
6秒前
yyd完成签到,获得积分10
6秒前
黄梓涵发布了新的文献求助20
8秒前
自由文博的应助被Fun_112采纳,获得30
9秒前
香蕉觅云的应助被syt采纳,获得10
10秒前
星辰大海的应助被四十采纳,获得10
11秒前
11秒前
Bertha完成签到 ,获得积分10
12秒前
12秒前
13秒前
傻傻的仙人掌完成签到,获得积分10
13秒前
15秒前
HLQF完成签到,获得积分0
16秒前
17秒前
17秒前
17秒前
18秒前
FashionBoy的应助被Atlantis30采纳,获得10
18秒前
野生修狗完成签到 ,获得积分10
19秒前
fifteen发布了新的文献求助10
20秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
Sex, Aging, and Death in a Medieval Medical Compendium: Trinity College Cambridge MS R.14.52, Its Texts, Language, and Scribe 500
高分子基功能界面水蒸发材料与应用研究 500
外场增强的水汽发电研究 500
基于结构调控的功能化水诱导发电材料与器件研究 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8188654
求助须知:如何正确求助?哪些是违规求助? 9576372
关于积分的说明 21847161
捐赠科研通 7786741
什么是DOI,文献DOI怎么找? 3435402
关于科研通互助平台的介绍 2559632
邀请新用户注册赠送积分活动 2482360