Influence of surface texture parameters of screw pump rotor on tribological properties of its friction pairs

Purpose This study aims to solve the premature failure of the rubber stator due to wear, reduce the frictional resistance moment of the screw pump to solve the problem of a model of Daqing oilfield screw pump oil recovery system shutdown after the difficult start. Design/methodology/approach For the first time, the rotor surface of a screw pump was treated with dot-matrix texture to study the effect of dot matrix texture on the tribological performance of the stator-rotor friction subsets of screw pump. Reciprocating friction tests with different texture morphologies (S-shape, double tongue) and angular parameters (0°, 45° and 90°) were conducted at 10% of the texture area and pump silicone grease. Findings When point texture was added to the surface of the rotor sample, the friction coefficient and wear quantity of the sample were lower than those of the surface without texture treatment, and the double tongue 0° combination showed the best tribological properties. At this time, the average coefficient of friction and wear is reduced by 22.8% and 62%, 28.6% and 64.8%. Originality/value The introduction of texture can effectively improve the tribological performance of progressive screw pumps, and this paper provides important theoretical and experimental support for the design of progressive screw pumps in practical applications.