Configuration influence in relation to fluid flow of venturi system

Abstract Due to its simplicity and accurately measuring the flow rate, the venturi system is a special kind of pipe that is widely used in various applied fluid mixtures. One of the venturi system's important applications is ejectors devices that accurately facilitate adding air to water to sustain oxygen demand target levels in many waterworks engineering systems. This study aims to improve venturi system measurement accuracy through experimental investigation and analytical analysis for the venturi system conditional configuration parameters effect on target aeration operational efficiency. In the experiment work, different runs are implemented to characterize the performance of such aerators by describing the impact of venturi characteristics and configurations, including water flow rate, air inlets orifices diameters, inlet velocities, throat lengths, inlet angles, outlets angles, and outlet diameters on aeration efficiency. Results show that the venturi air vent diameter is an important governing parameter for determining aeration performance value. Additionally, an indicated increase in aeration performance with an increasing throat length to its diameter ratio. Meanwhile, the results revealed a varying noted effect of the venturi system characteristics and configurations on aeration performance. Moreover, the equations that relate venturi system configuration and Reynolds numbers with the aeration operational performance are developed to facilitate the target accurate aeration efficiency estimation.