材料科学
钙钛矿(结构)
电子迁移率
量子点
电子
兴奋剂
碳量子点
光电子学
碳纤维
化学工程
复合数
纳米技术
复合材料
物理
工程类
量子力学
作者
Wei Hui,Yingguo Yang,Quan Xu,Hao Gu,Shanglei Feng,Zhenhuang Su,Miaoran Zhang,Jiaou Wang,Xiaodong Li,Junfeng Fang,Fei Xia,Yingdong Xia,Yonghua Chen,Xingyu Gao,Wei Huang
标识
DOI:10.1002/adma.201906374
摘要
Abstract An efficient electron transport layer (ETL) plays a key role in promoting carrier separation and electron extraction in planar perovskite solar cells (PSCs). An effective composite ETL is fabricated using carboxylic‐acid‐ and hydroxyl‐rich red‐carbon quantum dots (RCQs) to dope low‐temperature solution‐processed SnO2, which dramatically increases its electron mobility by ≈20 times from 9.32 × 10−4 to 1.73 × 10−2 cm2 V−1 s−1. The mobility achieved is one of the highest reported electron mobilities for modified SnO2. Fabricated planar PSCs based on this novel SnO2 ETL demonstrate an outstanding improvement in efficiency from 19.15% for PSCs without RCQs up to 22.77% and have enhanced long‐term stability against humidity, preserving over 95% of the initial efficiency after 1000 h under 40–60% humidity at 25 °C. These significant achievements are solely attributed to the excellent electron mobility of the novel ETL, which is also proven to help the passivation of traps/defects at the ETL/perovskite interface and to promote the formation of highly crystallized perovskite, with an enhanced phase purity and uniformity over a large area. These results demonstrate that inexpensive RCQs are simple but excellent additives for producing efficient ETLs in stable high‐performance PSCs as well as other perovskite‐based optoelectronics.
科研通智能强力驱动
Strongly Powered by AbleSci AI