Force Transmission Interfaces for Pressure Fluctuation Energy Harvesters

Wireless sensor nodes in state of the art fluid power systems used in monitoring and maintenance prediction demand long lasting power sources that do not rely on batteries. Energy harvesting is a promising technology that can provide the required energy to power wireless sensors. Pressure fluctuation energy harvesters can be employed in conventional hydraulic systems to convert the acoustic pressure fluctuation to electrical power. Present studies have explored the overall efficiency of these devices while experimentally describing losses in piezoelectric and circuit interfaces, nevertheless there is no study on the fluid to mechanical force transmission efficiency. In this paper we investigate the pressure to force transmission rate of two types of fluid to mechanical interfaces: a flat metal plate and a conventional hydraulic piston. The interfaces are investigated in conditions similar to those found in conventional hydraulic systems. The study shows that flat plate exhibit good force transmission for low pressure applications with a constant rate across frequencies, while exhibiting a decrease in force transmission at higher pressures. On the other hand the piston exhibit a more robust pressure design, with a constant force transmission rate at all pressures but with a dampening of force at higher frequencies. It is shown that small differences in force transmission ratios can have a considerable impact on the power generation.