Densification, microstructure, and mechanical properties of ZrC–SiC ceramics

Abstract ZrC–SiC ceramics were fabricated by high‐energy ball milling and reactive hot pressing of ZrH 2 , carbon black, and varying amounts of SiC. The ceramics were composed of nominally pure ZrC containing 0 to 30 vol% SiC particles. The relative density increased as SiC content increased, from 96.8% for nominally pure ZrC to 99.3% for ZrC‐30 vol% SiC. As SiC content increased from 0 to 30 vol%, Young's modulus increased from 404 ± 11 to 420 ± 9 GPa and Vickers hardness increased from 18.5 ± 0.7 to 23.0 ± 0.5 GPa due to a combination of the higher relative density of ceramics with higher SiC content and the higher Young's modulus and hardness of SiC compared to ZrC. Flexure strength was 308 ± 11 MPa for pure ZrC, but increased to 576 ± 49 MPa for a SiC content of 30 vol%. Fracture toughness was 2.3 ± 0.2 MPa·m 1/2 for pure ZrC and increased to about 3.0 ± 0.1 MPa·m 1/2 for compositions containing SiC additions. The combination of high‐energy ball milling and reactive hot pressing was able to produce ZrC–SiC ceramics with sub‐micron grain sizes and high relative densities with higher strengths than previously reported for similar materials.