材料科学
电解
氧化物
催化作用
电解质
镧
无机化学
制氢
氢
克拉克电极
高温电解
锶
电解槽
氧化镧
锰酸镧
化学工程
电极
化学
冶金
有机化学
物理化学
工程类
生物化学
作者
Ruofan Wang,Emir Dogdibegovic,Grace Y. Lau,Michael C. Tucker
标识
DOI:10.1002/ente.201801154
摘要
High‐temperature electrolysis (HTE) using solid oxide electrolysis cells (SOECs) is a promising hydrogen production technology and has attracted substantial research attention over the last decade. While most studies are conducted on hydrogen electrode‐supported type cells, SOEC operation using metal‐supported cells has received minimal attention. The development of metal‐supported SOECs with performance similar to the best conventional SOECs is reported. These cells have stainless steel supports on both sides, 10Sc1CeSZ electrolyte and electrode backbones, and nano‐structured catalysts infiltrated on both hydrogen and oxygen electrode sides. Samarium‐doped ceria (SDC) mixed with Ni is infiltrated as a hydrogen electrode catalyst, and the effect of ceria:Ni ratio is studied. On the oxygen electrode side, catalysts including lanthanum strontium manganite (LSM), lanthanum strontium cobalt ferrite (LSCF), praseodymium oxide (Pr6O11), and their composite catalysts with SDC (i.e., LSM‐SDC, LSCF‐SDC, and Pr6O11‐SDC) are compared. Using the materials with highest catalytic activity (Pr6O11‐SDC and SDC40‐Ni60) and optimizing the catalyst infiltration processes, excellent electrolysis performance of metal‐supported cells is achieved. Current densities of −5.31, −4.09, −2.64, and −1.62 A cm−2 are achieved at 1.3 V and 50 vol% steam content at 800, 750, 700, and 650 °C, respectively.
科研通智能强力驱动
Strongly Powered by AbleSci AI