材料科学
热电效应
纳米复合材料
结晶
球磨机
兴奋剂
热电材料
冶金
分析化学(期刊)
热导率
复合材料
化学工程
光电子学
热力学
物理
化学
工程类
色谱法
作者
Ahmad Ostovari Moghaddam,Ali Shokuhfar,Yu Zhang,Ting Zhang,Doris Cadavid,Jordi Arbiol,Andreu Cabot
标识
DOI:10.1002/admi.201900467
摘要
Abstract ZnSb/β‐Zn4Sb3 nanocomposites are produced from Zn1.1−xGexSb mixtures using a two‐step process. First, proper amounts of the three elements are mixed, melted, and reacted at 800 K. During this process, the nonstoichiometric mixture is crystallized in a combination of ZnSb and β‐Zn4Sb3 phases. Then, the material is ball milled and subsequently hot pressed. Through this process, a dense ZnSb/β‐Zn4Sb3 composite, consisting of β‐Zn4Sb3 nanoinclusions embedded within a ZnSb matrix, is formed. The particular phase distribution of the final ZnSb/β‐Zn4Sb3 composites is a consequence of the harder and more brittle nature of ZnSb than Zn4Sb3, which translates into a stronger reduction of the size of the ZnSb crystal domains during ball milling. This small particle size and the high temperature generated during ball milling result in the melting of the ZnSb phase and the posterior crystallization of the two phases in a ZnSb/β‐Zn4Sb3 matrix/nanoinclusion‐type phase distribution. This particular phase distribution and the presence of Ge result in excellent thermoelectric performances, with power factors up to 1.5 mW m−1 K−2, lattice thermal conductivities down to 0.74 W m−1 K−1, and a thermoelectric figures of merit, ZT, up to 1.2 at 650 K, which is among the highest ZT values reported for ZnSb.
科研通智能强力驱动
Strongly Powered by AbleSci AI