亚氧化物
钼
钨
无定形固体
薄膜
材料科学
化学计量学
原子层沉积
氧化物
沉积(地质)
图层(电子)
化学工程
分析化学(期刊)
无机化学
纳米技术
化学
结晶学
物理化学
冶金
有机化学
古生物学
工程类
生物
沉积物
作者
Miika Mattinen,Jan‐Lucas Wree,Niklas Stegmann,Engin Çiftyürek,Mhamed El Achhab,Peter J. King,Kenichiro Mizohata,J. Räisänen,Klaus Dieter Schierbaum,Anjana Devi,Mikko Ritala,Markku A. Leskelä
标识
DOI:10.1021/acs.chemmater.8b04129
摘要
Heteroleptic bis( tert -butylimido)bis( N, N ′-diisopropylacetamidinato) compounds of molybdenum and tungsten are introduced as precursors for atomic layer deposition of tungsten and molybdenum oxide thin films using ozone as the oxygen source. Both precursors have similar thermal properties but exhibit different growth behaviors. With the molybdenum precursor, high growth rates up to 2 Å/cycle at 300 °C and extremely uniform films are obtained, although the surface reactions are not completely saturative. The corresponding tungsten precursor enables saturative film growth with a lower growth rate of 0.45 Å/cycle at 300 °C. Highly pure films of both metal oxides are deposited, and their phase as well as stoichiometry can be tuned by changing the deposition conditions. The WO x films crystallize as γ-WO 3 at 300 °C and above, whereas the films deposited at lower temperatures are amorphous. Molybdenum oxide can be deposited as either amorphous (≤250 °C), crystalline suboxide (275 °C), a mixture of suboxide and α-MoO 3 (300 °C), or pure α-MoO 3 (≥325 °C) films. MoO x films are further characterized by synchrotron photoemission spectroscopy and temperature-dependent resistivity measurements. A suboxide MoO x film deposited at 275 °C is demonstrated to serve as an efficient hydrogen gas sensor at a low operating temperature of 120 °C.
科研通智能强力驱动
Strongly Powered by AbleSci AI