粒子图像测速
湍流
边界层
物理
表面粗糙度
机械
光学
表面光洁度
二次流
涡流
流量(数学)
测速
材料科学
几何学
数学
复合材料
热力学
作者
Kevin Kevin,Jason Monty,Honglei Bai,Gokul Pathikonda,Bagus Nugroho,Julio M. Barros,Kenneth T. Christensen,Nicholas T. Hutchins
摘要
A turbulent boundary layer developed over a herringbone patterned riblet surface is investigated using stereoscopic particle image velocimetry in the cross-stream plane at $Re_{\unicode[STIX]{x1D70F}}\approx 3900$ . The three velocity components resulting from this experiment reveal a pronounced spanwise periodicity in all single-point velocity statistics. Consistent with previous hot-wire studies over similar-type riblets, we observe a weak time-average secondary flow in the form of $\unicode[STIX]{x1D6FF}$ -filling streamwise vortices. The observed differences in the surface and secondary flow characteristics, compared to other heterogeneous-roughness studies, may suggest that different mechanisms are responsible for the flow modifications in this case. Observations of instantaneous velocity fields reveal modified and rearranged turbulence structures. The instantaneous snapshots also suggest that the time-average secondary flow may be an artefact arising from superpositions of much stronger instantaneous turbulent events enhanced by the surface texture. In addition, the observed instantaneous secondary motions seem to have promoted a free-stream-engulfing behaviour in the outer layer, which would indicate an increase turbulent/non-turbulent flow mixing. It is overall demonstrated that the presence of large-scale directionality in transitional surface roughness can cause a modification throughout the entire boundary layer, even when the roughness height is 0.5 % of the layer thickness.
科研通智能强力驱动
Strongly Powered by AbleSci AI