电感
中间层
等效串联电感
寄生元件
材料科学
寄生提取
电子工程
电气工程
等效电路
光电子学
计算机科学
工程类
电压
蚀刻(微加工)
复合材料
图层(电子)
作者
Jinxu Liu,Jihua Zhang,Zhen Fang,Shuqi Li,Zihan Wang,Ding Wen,Wenlei Li,Shan Li,Hongwei Chen,Libin Gao,Wanli Zhang
标识
DOI:10.1109/tmtt.2025.3572339
摘要
The rapid development of semiconductor technology has spurred demand for advanced 3-D packaging. Through-glass vias (TGVs) have emerged as a superior alternative to through-silicon vias (TSVs) in high-frequency applications, due to their lower dielectric constant, thermal stability, and superior electrical properties. The development of laser-induced wet etching (LIWE) technology has enabled the fabrication of ultrahigh aspect ratio TGVs (>75:1), significantly enhancing interconnect density in glass-based integration systems. However, as integration levels and operating frequencies rise, challenges, such as crosstalk, signal delay, and impedance mismatches—driven by parasitic inductance—intensify, necessitating accurate modeling to ensure signal integrity. Previous studies on parasitic inductance in vias have largely overlooked the skin effect, which leads to inaccuracies in the magnetic field solution near TGVs. This work addresses the limited accuracy in parasitic inductance calculations of TGVs caused by neglecting the skin effect, especially in high-density vertical interconnects. An analytical model is proposed to compute the magnetic field intensity and parasitic inductance of cylindrical, conical, and hyperbolic TGVs under high-frequency conditions, incorporating the skin effect. The model significantly enhances the accuracy of parasitic inductance calculations in high-density TGVs. By comparing various TGV geometries, it demonstrates its utility in addressing high-frequency challenges and provides valuable insights for optimizing TGV designs in advanced electronic packaging.
科研通智能强力驱动
Strongly Powered by AbleSci AI