材料科学
微观结构
共晶体系
金属间化合物
合金
冶金
钛合金
相(物质)
钛
复合材料
化学
有机化学
作者
Anna Zykova,Aleksandra Nikolaeva,A. O. Panfilov,Andrey Vorontsov,Alisa Nikonenko,Artem Dobrovolsky,A. V. Chumaevskii,D. A. Gurianov,А. В. Филиппов,N. V. Semenchuk,Н. Л. Савченко,Е. А. Колубаев,S. Yu. Tarasov
出处
期刊:Materials
[Multidisciplinary Digital Publishing Institute]
日期:2023-06-09
卷期号:16 (12): 4279-4279
被引量:4
摘要
Electron beam additive manufacturing from dissimilar metal wires was used to intermix 5, 10 and 15 vol.% of Ti-Al-Mo-Z-V titanium alloy with CuAl9Mn2 bronze on a stainless steel substrate. The resulting alloys were subjected to investigations into their microstructural, phase and mechanical characteristics. It was shown that different microstructures were formed in an alloy containing 5 vol.% titanium alloy, as well as others containing 10 and 15 vol.%. The first was characterized by structural components such as solid solution, eutectic intermetallic compound TiCu2Al and coarse grains of γ1-Al4Cu9. It had enhanced strength and demonstrated steady oxidation wear in sliding tests. The other two alloys also contained large flower-like Ti(Cu,Al)2 dendrites that appeared due to the thermal decomposition of γ1-Al4Cu9. This structural transformation resulted in catastrophic embrittlement of the composite and changing of wear mechanism from oxidative to abrasive.
科研通智能强力驱动
Strongly Powered by AbleSci AI