Recovery characteristics of reversible degradation for proton exchange membrane fuel cell stack under accelerated stress test

The reversible degradation of proton exchange membrane fuel cells (PEMFC) restricts the high efficiency and long-term durability of fuel cells. The reversible loss, restorable only through specific procedures, significantly diminishes both the operational efficiency and the predictability of their remaining service life. Consequently, it is imperative to elucidate the recovery characteristics of reversible loss in high power PEMFC stacks for engineering applications. However, most of the studies focus on small-area single cells or short stacks, researches on the full-size stacks considering the uniformity and consistency differences are scarce. The recovery characteristics of high-power PEMFC stacks remain unclear. Therefore, in this work, an accelerated stress test with the idle and rated currents as the boundary of the cyclic condition was designed for a 100 kW PEMFC stack to investigate the recovery characteristics. The periodic voltage fluctuations along with the shutdown operations indicate that the voltage recovery may be caused by the redistribution of water content within the stack, and the reversible degradation is more pronounced and readily reversible under the high current condition. The impedance results suggest that the redistribution of water within the catalyst layer takes longer compared to that in the membrane. Furthermore, analyses of single cell voltage indicate that the consistency of voltage recovery is more closely related to variations of water content within the catalyst layer. Cells with higher water content exhibit better voltage recovery.