Effect of the Inorganic Modification Mode on the Mechanical Properties of Rubber Recycled Concrete

The reasonable and effective application of waste tires and discarded concrete in concrete is an important branch of green concrete development. This paper investigates the effects of the inorganic modification mode on the basic mechanical properties of rubber recycled concrete based on indoor tests. Inorganic modification, such as water washing, acid washing, and alkaline washing modification, was mainly used to treat and modify rubber particles. The factors affecting the compressive strength, the splitting tensile strength, the flexural strength, the axial compressive strength, and the modulus of elasticity of modified rubber recycled concrete were analyzed. The study results show that the incorporation of recycled aggregates and rubber reduced the mechanical properties of concrete, with the compressive and splitting tensile strengths showing the greatest reductions of 27.36% and 27.24%, respectively. Three modification methods significantly improved the mechanical properties of rubber recycled concrete. The alkali washing modification method was the most effective, maximally improving the mechanical properties of rubber recycled concrete by 7.53–15.51%. The effects of the three modifications on the mechanical properties of concrete were ranked as follows: alkali washing > acid washing > water washing. This study provides a data basis for the practical application of rubber recycled concrete in engineering and a test basis for the development of green concrete.