50C Fast‐Charge Li‐Ion Batteries using a Graphite Anode

Abstract Li‐ion batteries have made inroads into the electric vehicle market with high energy densities, yet they still suffer from slow kinetics limited by the graphite anode. Here, electrolytes enabling extreme fast charging (XFC) of a microsized graphite anode without Li plating are designed. Comprehensive characterization and simulations on the diffusion of Li + in the bulk electrolyte, charge‐transfer process, and the solid electrolyte interphase (SEI) demonstrate that high ionic conductivity, low desolvation energy of Li + , and protective SEI are essential for XFC. Based on the criterion, two fast‐charging electrolytes are designed: low‐voltage 1.8 m LiFSI in 1,3‐dioxolane (for LiFePO 4 ||graphite cells) and high‐voltage 1.0 m LiPF 6 in a mixture of 4‐fluoroethylene carbonate and acetonitrile (7:3 by vol) (for LiNi 0.8 Co 0.1 Mn 0.1 O 2 ||graphite cells). The former electrolyte enables the graphite electrode to achieve 180 mAh g −1 at 50C (1C = 370 mAh g −1 ), which is 10 times higher than that of a conventional electrolyte. The latter electrolyte enables LiNi 0.8 Co 0.1 Mn 0.1 O 2 ||graphite cells (2 mAh cm −2 , N/P ratio = 1) to provide a record‐breaking reversible capacity of 170 mAh g −1 at 4C charge and 0.3C discharge. This work unveils the key mechanisms for XFC and provides instructive electrolyte design principles for practical fast‐charging LIBs with graphite anodes.