电场
材料科学
电介质
制作
导电体
印刷电路板
多孔性
光电子学
基质(水族馆)
复合材料
相对介电常数
领域(数学)
场强
快速成型
介电强度
电火花加工
功率密度
电气工程
光学
田口方法
电压
Ku波段
电极
作者
Takahisa Ueno,Takashi Furukawa,Takashi Sakugawa
标识
DOI:10.35848/1347-4065/ae7b9c
摘要
Abstract This study proposes a high-voltage circuit board fabrication method using 3D printing with conductive and insulating PLA filaments. A field plate (FP) structure embedded inside the substrate mitigates localized electric field concentration at the triple point, where conductor, insulator, and air meet. Electrostatic field simulation showed that optimal FP geometry reduces the electric field concentration near the triple point by approximately a factor of 3.7, and revealed the design trade-off between surface-side field mitigation and internal field enhancement. Experimental evaluation on a practical circuit pattern demonstrated a 2.14-fold improvement in discharge inception voltage. Despite a porous internal structure at 15% infill density, the FP structure provided sufficient insulation performance under rapid prototyping conditions. A transformer-boosted pulse power supply constructed using this method generated stable high-voltage pulses of 7.4 kV peak without surface discharge or internal breakdown under a 400 V input.
科研通智能强力驱动
Strongly Powered by AbleSci AI