材料科学
钝化
钙钛矿(结构)
异质结
沉积(地质)
晶界
相(物质)
阴极发光
图层(电子)
化学工程
光电子学
钙钛矿太阳能电池
碘化物
太阳能电池
薄膜
能量转换效率
纳米技术
电子全息术
煅烧
卤化物
化学物理
无机化学
扫描电子显微镜
作者
Marielle Deconinck,Shivam Kumar Singh,Vladimir Vladimirovich Shilovskikh,L. Andrés Guerrero‐León,Boris B. Rivkin,Yana Vaynzof
标识
DOI:10.1021/acsami.5c22628
摘要
High Resolution Image Download MS PowerPoint Slide A three-dimensional/two-dimensional (3D/2D) heterojunction interface is well-known for reducing surface recombination in perovskite solar cells. The effectiveness of 3D/2D interfaces has been particularly highlighted in standard (n-i-p) structures. However, their use in inverted (p-i-n) structures is less common due to limitations on the thickness of the 2D phase, which is essential for efficient electron extraction. In this study, we investigate whether 3 D /2D dimensional engineering is beneficial in inverted architecture devices by introducing the bulky organic cation 4-chlorophenethylammonium iodide (Cl-PEAI) to triple cation Cs 0.05 (MA 0.17 FA 0.83 ) 0.95 Pb(I 0.9 Br 0.1 ) 3 perovskite films using two different deposition methods: as a separate interlayer on top of the fully formed 3D perovskite and via an antisolvent approach during film formation. Through low-energy cathodoluminescence measurements─a highly sensitive method for probing the presence of 2D phases on the surface of 3D layers─we reveal that the interlayer method leads to the formation of 2D domains ( n = 1 and n = 2). In contrast, the antisolvent method results in surface and grain boundary passivation without the formation of a detectable separate 2D phase. This observation is further correlated with device performance, where passivation leads to improvement, while 2D phase formation does not. These results highlight the significant impact of the deposition method on the formation of the 2D layer over the 3D perovskite in inverted architectures, revealing that 2D phase formation is not always beneficial for device performance in inverted architecture solar cells.
科研通智能强力驱动
Strongly Powered by AbleSci AI