电渗析
化学
离解(化学)
膜
离子交换
聚砜
无机化学
反向电渗析
离子
化学工程
活化能
开路电压
键离解能
碱金属
水处理
锂离子电池
锂(药物)
分析化学(期刊)
木质素
储能
作者
Xu Zhang,Yuting Yuan,Xinyu Peng,Deqing Liu,Daoliang Wang,Dawei Zhang,Qingchun Yang,C. Y. Jiang
摘要
Bipolar membrane electrodialysis (BMED) promises to convert Li 2 SO 4 into LiOH, but suffers from inefficient interfacial water dissociation and insufficient alkaline stability. Herein, an interface‐engineered bipolar membrane (BPM) was developed using an alkaline lignin‐modified Ti 3 C 2 T x (AL‐Ti 3 C 2 T x ) interlayer. Grafting alkaline lignin onto Ti 3 C 2 T x introduced hydroxyl‐rich sites and improved hydrophilicity, thereby facilitating water dissociation. The optimized BPM (sulfonated polysulfone cation exchange layer/AL‐Ti 3 C 2 T x interlayer/N‐methylpiperidine‐quaternized poly(2,6‐dimethyl‐1,4‐phenylene oxide) anion exchange layer) achieved a transmembrane voltage of 0.97 V at 115 mA·cm −2 and a current efficiency of 99.52%, outperforming commercial BP‐1 and SSBP‐1 membranes. DFT indicated that AL‐Ti 3 C 2 T x reduces the water dissociation energy barrier to 0.26 versus 0.47 eV for pristine Ti 3 C 2 T x . In BMED, the membrane enabled efficient conversion of Li 2 SO 4 into high‐purity LiOH (>99.7%) with a total energy cost of 2.95 $·kg −1 . This work demonstrates a biomass‐enabled MXene interfacial design for high‐performance BPMs and sustainable lithium chemical production.
科研通智能强力驱动
Strongly Powered by AbleSci AI