材料科学
合金
微观结构
沉淀硬化
软化
降水
冶金
相(物质)
硬化(计算)
固溶体
复合材料
物理
气象学
有机化学
化学
图层(电子)
作者
Tao-Tsung Shun,Liang-Yi Chang,Ming-Hua Shiu
标识
DOI:10.1016/j.matchar.2013.04.012
摘要
Abstract In this study, the effect of aging treatment for 24–144 h at 600–1000 °C on the hardness and microstructure of an as-cast CoCrFeNiMo 0.85 high-entropy alloy was investigated. The microstructure of the as-cast alloy consists of three different phases that include an face-centered cubic solid solution matrix, a (Mo,Cr)-rich σ phase, and a minor (Mo,Cr)-rich μ phase. The σ phase can be completely transformed into the μ phase via aging at 900–1000 °C. The optimum hardness is obtained upon precipitation of fine needles of σ phase in the face-centered cubic matrix, which occurs at an aging temperature of 700 °C. The hardening effect is observed to decrease with any further increase in temperature beyond 700 °C. Comparison of the hardness of aged alloys and the as-cast alloy reveals that no obvious softening occurs after aging at temperatures of up to 1000 °C.
科研通智能强力驱动
Strongly Powered by AbleSci AI