电泳沉积
材料科学
化学工程
涂层
制作
介孔材料
沉积(地质)
丙酮
基质(水族馆)
吸附
介孔二氧化硅
粒子(生态学)
悬挂(拓扑)
粒径
纳米技术
化学
有机化学
催化作用
替代医学
纯数学
古生物学
沉积物
病理
工程类
地质学
海洋学
生物
医学
数学
同伦
作者
Hideyuki Negishi,Akira Endo,Takao Ohmori,Keiji Sakaki
摘要
The technological feasibility of applying electrophoretic deposition (EPD) to ordered mesoporous silicate (MPS) powder has been studied. The EPD technique was investigated for the fabrication of an MPS thick film using MPS synthesized by the spray-drying method. It was found that the MPS powder deposition rate was low with an alcohol EPD bath and very high with an acetone EPD bath. The deposition amount could be easily controlled by changing the MPS powder concentration, the applied dc voltage, and the deposition time. An MPS particle/acetone suspension in which the particles were negatively charged showed the highest deposition rate among the tested organic solvents. MPS powder was deposited by EPD at 50 V for 10 min onto a tubular stainless steel substrate, and a uniform coating approximately 250 μm in thickness was obtained. After heat treatment at 573 K, the MPS powder could be fixed on the substrate without the addition of binders. The obtained MPS thick film had the same porous structure and nitrogen and water vapor adsorption properties as the parent MPS powder.
科研通智能强力驱动
Strongly Powered by AbleSci AI