期刊:IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control [Institute of Electrical and Electronics Engineers] 日期:2014-04-01卷期号:61 (4): 705-709被引量:57
标识
DOI:10.1109/tuffc.2014.2958
摘要
A small linear ultrasonic motor which consists of a piezoelectric ceramic Pb(Zr,Ti)O 3 (PZT) tube (outside diameter 5 mm, inside diameter 3 mm, length 15 mm, acts as stator) and a shaft (acts as slider) has been developed. The outer surface electrode of the PZT tube is divided into 4 parts to excite longitudinal-bending (L 1 -B 2 ) modes, which could be then used to produce linear motion. The motor shows a high power (force) density. It has a no-load speed of 0.14 m/s, a stall force of 0.3 N, and a maximum output power of 9.3 mW under an applied voltage of 100 Vpp. The method for further improving the performance has been discussed. The proposed motor can be further miniaturized because of its simple structure, and it has potential to be applied to medical microrobots, endoscopes, or micro laparoscopic devices, etc.