Fiber Bragg grating sensing system for temperature measurements based on optically injected DFB-LD with an OEO loop

A novel fiber Bragg grating (FBG) sensing system, based on an optically injected distributed feedback laser diode (DFB-LD) with an optoelectronic oscillating (OEO) loop, is proposed and experimentally demonstrated for temperature measurements with high and tunable sensitivity. The FBG sensor device works as an edge filter to adjust the optical power of the injected beam in response to temperature variations. The optically injected DFB-LD works at Period-one (P1) oscillating state, and the central wavelength of the oscillating mode of the DFB-LD can be tuned by the variable power of the injected beam. Furthermore, an OEO loop is implemented to improve the signal quality of the generated P1 microwave signal. Hence, the sensing parameter of temperature is converted to the frequency variation of the generated P1 microwave signal in the proposed sensing system. In the proof-of-concept experiment, a series of P1 microwave signals are generated while different temperatures are applied to the FBG sensor. The sensitivity of the proposed FBG sensing system for temperature measurements can be tuned from 0.44322 GHz/°C to 1.25952 GHz/°C. The stability and repeatability experiments are also performed, demonstrating the high measurement accuracy (0.0629°C) and low error of the system. The proposed FBG-based sensing and interrogation system exhibits high sensitivity, large tunability, good linearity, and flexible sensing generality.