热解
聚合
材料科学
复合材料
微晶
碳纤维
原位聚合
无定形固体
化学工程
聚合物
化学
有机化学
复合数
工程类
冶金
作者
Ivan Gallegos,Josh Kemppainen,Jacob R. Gissinger,Małgorzata Kowalik,Adri C. T. van Duin,Kristopher E. Wise,SHANKARA GOWTHAM,Gregory M. Odegard
出处
期刊:Carbon trends
[Elsevier BV]
日期:2023-08-24
卷期号:12: 100290-100290
被引量:39
标识
DOI:10.1016/j.cartre.2023.100290
摘要
The complex structural and chemical changes that occur during polymerization and pyrolysis critically affect material properties but are difficult to characterize in situ. This work presents a novel, experimentally validated methodology for modeling the complete polymerization and pyrolysis processes for phenolic resin using reactive molecular dynamics. The polymerization simulations produced polymerized structures with mass densities of 1.24 ± 0.01 g/cm3 and Young's moduli of 3.50 ± 0.64 GPa, which are in good agreement with experimental values. The structural properties of the subsequently pyrolyzed structures were also found to be in good agreement with experimental X-ray data for the phenolic-derived carbon matrices, with interplanar spacings of 3.81 ± 0.06 Å and crystallite heights of 10.94 ± 0.37 Å. The mass densities of the pyrolyzed models, 2.01 ± 0.03 g/cm3, correspond to skeletal density values, where the volume of pores is excluded in density calculations for the phenolic resin-based pyrolyzed samples. Young's moduli are underpredicted at 122.36 ± 16.48 GPa relative to experimental values of 146 – 256 GPa for nanoscale amorphous carbon samples.
科研通智能强力驱动
Strongly Powered by AbleSci AI