材料科学
降水
合金
冶金
沉淀硬化
电阻率和电导率
铜
电导率
活化能
物理化学
电气工程
物理
工程类
气象学
化学
作者
Hyo Moon Nam,Haeun Lee,Hyokyeong Kim,Jung Gu Lee,Jiwoong Kim
标识
DOI:10.1016/j.jmrt.2023.11.019
摘要
The effects of interfacial energy on precipitation behavior and physical properties of Cu–Ni–Si-(Co) alloys were investigated. The Cu-1.3Ni-0.3Si and Cu-1.3Ni-0.6Si-1.0Co alloys (in weight %) were prepared by combined cold-rolling and aging processes. The addition of Co promoted the formation of (Ni,Co)2Si by replacing Ni with Co in Ni2Si. Ab initio calculations demonstrated that the small addition of Co considerably reduced the interfacial energy between the Cu matrix and (Ni,Co)2Si, which effectively decreased the activation energy for precipitation. As a result, the precipitation of fine rod-shaped (Ni,Co)2Si was accelerated during the aging process and the number density of the precipitates increased up to 9.0 × 1010 cm−2. The nano-scale (Ni,Co)2Si precipitates with an average size of 13.5 nm strengthened the alloy properly through the Orowan mechanism without much loss of electrical conductivity. The maximum hardness and electrical conductivity were 220 Hv and 51 % International Annealed Copper Standard, respectively, for the Cu-1.3Ni-0.6Si-1.0Co alloy aged for 4 h at 420 °C.
科研通智能强力驱动
Strongly Powered by AbleSci AI