Facile fabrication of regenerable spherical La0.8Ce0.2MnO3 pellet via wet-chemistry molding strategy for elemental mercury removal

Perovskite-based sorbents have received extensive attention in the field of mercury abatement. However, the excellent Hg0 adsorption performance on the lab scale hardly transforms into industrial-scale utilization because of the elutriation and microcrystalline nature of powdery perovskite sorbent. Hence, the granulation of perovskite into pellets is a strongly solicited and urgent demand. In this work, a universal granulation strategy is exploited for fabricating perovskite sorbent pellets for Hg0 capture from coal combustion flue gas (CCFG) based on a facile wet-chemistry method. This route takes advantages of the unique thermal sensitivity and thermal decomposition characteristics of agar powder and surface tension of medium to simultaneously trade off the molding, pore creation, and mechanical property of perovskite-based sorbent pellets. Besides, silica sol was also added to further enhance the physical strengths of sorbent pellets. The obtained perovskite sorbent pellet (i.e., LCMO-A-Z-2) with a favorable BET surface area of 113.16 m2 g−1 and pore diameter of 8.81 nm, largely facilitating Hg0 diffusion and capture over sorbent pellets. LCMO-A-Z-2 was further employed to Hg0 adsorption experiment under simulated CCFG, which exhibited satisfactory Hg0 adsorption capacity of 2.07 mg g−1 and nearly identical Hg0 adsorption performance after 5 cycles. The weight loss was approximately 13 % after 1000 rotations in the anti-attrition ability experiment suggesting its outstanding mechanical strength. It is reasonable to deduce this granulation method can be readily extended to other powdery sorbents. This work makes first step towards the application of sorbent pellets under application-relevant conditions and support the ultimate implementation of traditional sorbents in various large-scale industrial scenarios.