钝化
材料科学
硅
氢
退火(玻璃)
非晶硅
拉曼光谱
太阳能电池
无定形固体
基质(水族馆)
光电子学
量子效率
晶体硅
化学工程
纳米技术
化学
图层(电子)
冶金
结晶学
光学
物理
海洋学
有机化学
工程类
地质学
作者
Zhenyu Sun,Li Wang,Hao Luo,Phillip Hamer,Hui Ye,Brett Hallam
标识
DOI:10.1021/acsaem.3c02283
摘要
In this study, we explored the use of low-temperature deposited a-Si:H(i) as a hydrogen source for the hydrogenation of SiGe solar cells on Si substrates. Cells integrated with a-Si:H(i) layers exhibited significant performance improvements after thermal annealing, with a maximum enhancement of 50 mV (20.2%rel), 8%abs (15%rel), and 1%abs (44%rel) in VOC, FF, and efficiency, respectively. These results, along with Raman spectroscopy measurements, confirm that hydrogen was released from a-Si:H(i) during thermal treatment and likely diffused into the SiGe/Si cells, providing defect passivation. External quantum efficiency measurements further revealed that the passivation enhancement occurred mainly on the front surface and nearby, indicating that hydrogen primarily diffused into the near-surface region and passivated defects in that area. The correlation between the changes in the hydrogen content from a-Si:H(i) and variations in VOC after thermal annealing was also examined to further understand the hydrogen passivation effect. Overall, this study demonstrates the successful implementation of hydrogenation using a-Si:H(i) as a hydrogen source with significant improvements in cell performance, providing potential pathways for developing efficient SiGe/Si solar cells.
科研通智能强力驱动
Strongly Powered by AbleSci AI