亚硫酸盐
木质素
秆
纤维素
化学
水解
制浆造纸工业
食品科学
有机化学
生物
园艺
工程类
作者
Dong Li,Rui Wu,Sheng Zhang,Zhichang Liu,Wei Pei,Xin Hu,Liying Huang,Xiaojun Shen,Jungang Jiang,Lei Wang
出处
期刊:Catalysts
[Multidisciplinary Digital Publishing Institute]
日期:2024-12-04
卷期号:14 (12): 889-889
被引量:2
标识
DOI:10.3390/catal14120889
摘要
Sulfite-catalyzed acid pretreatment to overcome the inherent recalcitrance of biomass offers a significant advantage in terms of obtaining high glucose conversion. However, the residual lignin after enzymatic hydrolysis has not been fully exploited. Herein, this study introduced a joint approach using sulfite-catalyzed acid pretreatment (SPROL) and pyrolysis to upgrade tobacco stalk to produce fermentable sugar, and the resulting lignin is used to produce bio-oil and bio-char. The results suggest that SPROL pretreated tobacco stalk yields a high cellulose-based glucose selectivity of 75.9% with 15 FPU/g substrate enzyme dosage at 50 °C after 72 h of enzymolysis. Lignin characterization reveals that sulfonation occurred during SPROL pretreatment, and as the dosage of sulfonating agent increased, the thermal stability of the residue lignin decreased. After sample pyrolysis at 600 °C for 30 min, approximately 22%, 33%, and 45% of the lignin undergoes conversion into bio-oil, bio-char, and gas products, respectively. The bio-oil analysis results demonstrated that acetic acid is the most abundant identified GC-MS component at around 69.91% at the optimal condition, which implied that it could be of high value when utilized for pyroligneous acid. This research provides a synthetic approach using the SPORL technique to process tobacco stalk into fermentable sugar, bio-oil, and bio-char, which is significant for the commercial utilization of agricultural waste into value-added products.
科研通智能强力驱动
Strongly Powered by AbleSci AI