Development of 4D-Printed Arterial Stents Utilizing Bioinspired Architected Auxetic Materials

The convergence of 3D printing and auxetic materials is paving the way for a new era of adaptive structures. Auxetic materials, known for their unique mechanical properties, such as a negative Poisson’s ratio, can be integrated into 3D-printed objects to enable them to morph or deform in a controlled manner, leading to the creation of 4D-printed structures. Since the first introduction of 4D printing, scientific interest has spiked in exploring its potential implementation in a wide range of applications, from deployable structures for space exploration to shape-adaptive biomechanical implants. In this context, the current paper aimed to develop 4D-printed arterial stents utilizing bioinspired architected auxetic materials made from biocompatible and biodegradable polymeric material. Specifically, three different auxetic materials were experimentally examined at different relative densities, under tensile and compression testing, to determine their mechanical behavior. Based on the extracted experimental data, non-linear hyperelastic finite element material models were developed in order to simulate the insertion of the stent into a catheter and its deployment in the aorta. The results demonstrated that among the three examined structures, the ‘square mode 3’ structure revealed the best performance in terms of strength, at the same time offering the necessary compressibility (diameter reduction) to allow insertion into a typical catheter for stent procedures.