Numerical investigation into the composite behaviour of over-deformed segmental tunnel linings strengthened by bonding steel plates

Bonding steel plate has been used as a strengthening approach to repair disrupted segmental lining of operational tunnels. This paper introduces numerical investigation into the composite behaviour of the initially deformed segmental tunnel linings strengthened by bonding steel plates using finite element modelling. Cohesive zone modelling was used to simulate the interface bonding behaviour between the segmental linings and steel plates. The full history of the tunnel behaviour before and after strengthening were simulated, where the segmental tunnel lining is initially loaded to create some deformation, then after bonding steel plate, the strengthened tunnel is reloaded until failure occurs. By comparing the results with experimental data from the literature, the proposed model was proved to be capable of simulating the strengthened lining behaviour and able to capture the strengthening failure process in terms of the interface debonding. Subsequently, the segmental lining response and interface shear stress distribution and propagation were analysed to interpret the interaction and failure mechanism of the steel plate strengthened segmental linings. The influence of the initial deformation and the steel plate thickness were investigated and discussed in terms of the strengthened stiffness and capacity. It has been found that the interface shear stress concentration occurred at the positions of the segment joints, where bond damage first initiated. The ultimate failure of the steel plate strengthening happened suddenly once a local debonding zone close to the segmental joint was formed. In addition, the predicted results indicate that a delay in strengthening would result in an increase in strengthened capacity but a decrease in strengthened stiffness. By using thicker steel plates, the strengthened stiffness was improved, while the strengthened capacity could be improved only if the thickness was relatively thin.