Novel, Green, and Scalable Aqueous Synthesis of Yellow–Green Emitting Cs3Cu2Cl5 Scintillator and its Application in High‐Resolution TFT Panel for X‐Ray Imaging Detector

Abstract Copper‐based metal halide scintillators have received increasing attention due to their high light yield and nontoxicity. However, the synthetic methods are still not feasible for actual commercialization for the difficulty in scaling up and the absence of green chemical footprint. Herein, we report a new, simple, aqueous synthetic method for the mass production of highly purified and crystallized Cs 3 Cu 2 Cl 5 powder by a room‐temperature reaction between a saturated aqueous solution of CsCl and a saturated hydrochloric acid solution of CuCl. The product exhibits a photoluminence peak centering at 527 nm (FWHM = 106.7 nm) and a quantum yield (PLQY) of 97%. A prototype X‐ray imaging detector is fabricated by coupling a large area scintillation screen prepared by blade coating of Cs 3 Cu 2 Cl 5 powder and a commercial thin‐film transistor (TFT) panel (16 cm × 13 cm, 125 µm pixel size) with readout circuit. The device exhibits a high spatial resolution of 4 lp mm −1 , exceeding the theoretical limit of the TFT panel, and an excellent dynamic imaging ability. In short, this work demonstrates an efficient novel synthetic method of Cs 3 Cu 2 Cl 5 and its application as X‐ray imaging device, providing an applicable solution for its future commercialization.