泥浆
共晶体系
材料科学
冶金
铬
碳化物
铸铁
腐蚀
微观结构
复合数
粒径
复合材料
地质学
古生物学
作者
Setsuo Aso,Tsutomu Sugawara,Michihiro Tagami,Shoji Goto
标识
DOI:10.2320/jinstmet1952.57.3_312
摘要
The relation between eroding rate (Wk) and slurry speed (V) was given by Wk=KVn (K: constant) on sand-erosion of 15%Cr and 15%Cr-3%Ni eutectic white cast irons. The experimental expression of the eroding rate, which was obtained through the slurry temperature and slurry speed dependences of the sand-erosion characteristics, was in good agreement with the measured eroding rates. The erosion behavior and the eroded sureface structure suggested the change of the eroding mechanism at low and high-slurry speed ranges. The change of the eroding behavior was assumed to be related to the yield stress of the specimens. However, the applied stress due to particle collision at the change of the eroding behavior was calculated to be much higher than the yield stress. This difference was speculated to be due to the composite microstructure of eutectic carbide and the matrix in the high chromium white cast irons.
科研通智能强力驱动
Strongly Powered by AbleSci AI