Development of a Three-Dimensional Electrochemical System Using a Blue TiO2/SnO2–Sb2O3 Anode for Treating Low-Ionic-Strength Wastewater

Reducing energy use is crucial to commercialize electrochemical oxidation technologies. We developed a three-dimensional (3-D) electrochemical system that can significantly reduce the applied voltage and effectively degrade organic contaminants in low-ionic-strength wastewaters. The 3-D system consisted of a composite wire mesh anode (composed of blue TiO2 nanotubes covered with SnO2–Sb2O3), a proton exchange membrane, and a stainless-steel wire mesh cathode, which were compressed firmly together. For the 3-D system, we placed the anode of a 3-D electrode toward the wastewater that flowed past the anode. Both the two-dimensional (2-D) and 3-D systems had the same anode and cathode. We found that the 3-D system could reduce the applied voltage by 75.7% and reduce the electrical efficiency per log order reduction (EE/O) by 73% for 0.001 M Na2SO4. For Na2SO4 concentrations greater than 0.05 M, the 2-D system had a slightly lower EE/O. We also compared the EE/O of electrochemical advanced oxidation processes (EAOPs) with that of other advanced oxidation processes (UV/H2O2, UV/persulfate, O3/H2O2, UV/ TiO2, and UV/chlorine). We found that EAOPs have a much higher EE/O for low BA concentrations (20 mg/L) and a much lower EE/O for high BA concentrations (2000 mg/L).