Intermetallics, which are ordered alloys, have excellent high temperature strength. Unfortunately a universal problem facing intermetallics is the lack of ductility. This program attempted to look at some novel solutions for enhancing ductility in intermetallics. Deformation twinning has been demonstrated in TiNi to be responsible for its ductility. This was a surprising result since twinning was not believed to occur readily in ordered alloys. Furthermore the twinning occurred on a (114) plane which had not been previously observed. Research into determining the mechanisms for twinning in ordered alloy and understanding how twinning enhances the ductility of intermetallic was studied. Martensitic transformations in many intermetallics also provides a possible means of enhancing ductility. The detwinning of martensite twins or transformation induced martensite provides a mechanism for accommodating large strains. It is known that a metastable martensitic phase may be created by quenching a non-stoichiometric NiAl alloy. This presents the potential of substantial ductility in NiAl. Investigation of the martensitic phase transformation and its effect on the ductility of NiAl alloys was investigated.