材料科学
钙钛矿(结构)
量子点
太阳能电池
光电子学
钙钛矿太阳能电池
能量转换效率
串联
吸收(声学)
带隙
平面的
短路
等离子太阳电池
俘获
光学
电压
聚合物太阳能电池
复合材料
物理
化学
化学工程
生物
工程类
结晶学
量子力学
计算机图形学(图像)
计算机科学
生态学
作者
Mahta Majdi,Mehdi Eskandari,Davood Fathi
出处
期刊:Solar Energy
[Elsevier BV]
日期:2021-10-28
卷期号:230: 618-627
被引量:33
标识
DOI:10.1016/j.solener.2021.10.008
摘要
In recent years, have been seen a leap at the opportunity of investigation tandem solar cells. This due to the complementary bandgap energies of various layers which leads to enhancement of the light absorption and the power conversion efficiency (PCE) of this type of solar cells. In this numerical based study, a new hole transport material (HTM) free perovskite/quantum dot solar cell, exploiting a finite element method (FEM), has been conducted for the first time. The series connection of perovskite (CH3NH3PbI3, 1.55 eV) and colloidal quantum dot (CQD) of lead sulphide (PbS-CQD, 1.3 eV) as light-carrier absorber layers is analysed to achieve the optimal performance with short-circuit current (Jsc) = 25.4 mA/cm2, open-circuit voltage (Voc) = 0.8 V, fill factor (FF) = 0.84. The simulation results illustrate that tandem solar cell yields an overall PCE of 17.2%, exceeding that of 14.53 % of bare perovskite absorbing layer in planar perovskite solar cell (PSC). To enhance the light absorption within the absorber layer and consequently to achieve a higher efficiency, pyramidal texturing of layers, as an effective light-management method was investigated and it reveals that the Jsc and PCE is increased to 29.3 mA/cm2 and 19.52% respectively. Comparing to the planar perovskite architecture, PCE is improved from 14.53% to 19.52%, indicating a great potential of nanostructure designing in tandem solar cells.
科研通智能强力驱动
Strongly Powered by AbleSci AI