Performance study on the CI engine using LHR and LTC in combination with biodiesel blends

Currently, the research of a single-cylinder 4-stroke direct injection diesel engine, which was naturally aspired, was used, and two modification methods were used. The first is the low-heat rejection method (LHR), and the second is the low-temperature combustion method (LTC). LHR was introduced into the engine by ceramic coating with alumina, which is applied to engine components such as the piston, cylinder lining, and valves and has a thickness of 300 microns without affecting the dimensions of the engine parts. In the next method, low - temperature combustion (LTC) method is done with EGR technique. And the exhaust gas recirculation setting (EGR) is included in the same setup as that of first method. Since, 15% of an exhaust gas is used in the EGR process. The diesel is blended with 20% of mahua biodiesel and 5% of ethanol as a fuel. After that, the engine performance is tested with conventional fuel when compared with biodiesel as a combined LHR and LTC methods. Finally, the engine output is increased by up to 3.48% as a result of the combination of LHR and LTC. As a result, emission levels could be dramatically decreased, and other results obtained could include a decrease in infrared radiation, resulting in a decrease in specific fuel consumption (SFC), and a substantial improvement in engine efficiency characteristics.