乙苯
催化作用
热重分析
苯乙酮
X射线光电子能谱
傅里叶变换红外光谱
材料科学
尖晶石
热分解
核化学
无机化学
化学工程
化学
有机化学
工程类
冶金
作者
Shankha Shubhra Acharyya,Shilpi Ghosh,Rajaram Bal
摘要
We report a facile hydrothermal synthesis method to prepare CuCr 2 O 4 spinel catalyst nanoparticles 20−60 nm in size, mediated by cationic surfactant cetyltrimethylammonium bromide. Detailed characterization of the material was carried out by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, and inductively coupled plasma–atomic emission spectroscopy (ICP-AES). XRD analysis revealed the formation of a CuCr 2 O 4 spinel phase and TEM analysis showed that the particle size was 20−60 nm. The catalyst was highly active for selective oxidation of ethylbenzene to acetophenone with H 2 O 2 . The influence of reaction parameters such as temperature, substrate-to-oxidant molar ratio, reaction time, etc. were investigated in detail. The reusability of the catalyst was tested by conducting same experiments with the spent catalyst, and it was found that the catalyst did not show any significant activity loss, even after five cycles of reuse. An ethylbenzene conversion of 68.5% with 78% acetophenone selectivity was achieved over this catalyst at a temperature of 70 °C. However, significant H 2 O 2 decomposition takes place on the catalyst, necessitating its usage in 5-fold excess.
科研通智能强力驱动
Strongly Powered by AbleSci AI