Extrudate swell is a common phenomenon observed by the polymer extrusion industry. Accurate prediction of extrudate swell in polymer melt extrusion is important as this helps in appropriate extrudate design for profile extrusion applications. Extrudate swell prediction has shown significant difficulties due to two key reasons. The first is the appropriate representation of the constitutive behavior of the polymer melt. The second is regarding the simulation of the free surface, which requires special techniques in the traditionally used Eulerian framework. We have simulated extrudate swell using an Arbitrary Lagrangian Eulerian (ALE) technique based finite element formulation and the same has been validated by comparing the results with reported numerical and experimental studies. In the present work we compare our ALE simulations with our own experimental data on the extrudate swell of commercial grade HDPE, LLDPE and LDPE resins. The resins were characterized for their rheological behavior in both shear and uniaxial extension. The polymers were extruded from a capillary under isothermal conditions and the extrudates were observed on‐line using a video camera. ALE simulations were performed using PTT model for linear (HDPE) polymer melts and eXtended Pom‐Pom (XPP) model for branched (LDPE). The simulated extrudate swell showed good match with the experimental data.