电极
材料科学
电解质
功率密度
锂(药物)
电化学
阴极
空隙(复合材料)
纳米技术
复合材料
化学工程
光电子学
功率(物理)
化学
热力学
物理
工程类
内分泌学
物理化学
医学
作者
Runming Tao,Yuan Gu,Jaswinder Sharma,Kunlun Hong,Jianlin Li
标识
DOI:10.1016/j.mtchem.2023.101672
摘要
High areal capacity electrodes hold great potential for high-energy density lithium-ion batteries (LIBs), but their poor electrochemical kinetics limit their power density. In this study, high areal capacity 3D-structured LiNi0.8Mn0.1Co0.1O2 cathodes (4.3 mAh cm−2) are prepared via 3D printing with a manner of direct ink writing. The electrodes had an enlarged electrode–electrolyte contact area, shortened diffusion pathway, and reduced intercalation-induced stress, thereby delivering enhanced rate capability and cyclability in LIBs, which is 143.6 mAh g−1 at 3C and a 60.2 % capacity retention over 800 cycles at 1C. Moreover, at electrode level, the 3D-NMC exhibits an energy and power densities of 313.1 Wh kg−1 and 657.9 W kg−1, respectively. Furthermore, the theoretical calculation suggests that reducing the gap width will be highly beneficial to the energy and power densities. This work establishes a milestone in understanding the cycling effect on the electrode local structure, including the void area and the LiNi0.8Mn0.1Co0.1O2 region, which confirms the effectiveness of 3D printing for electrode preparation.
科研通智能强力驱动
Strongly Powered by AbleSci AI