材料科学
导电体
弹性体
热塑性聚氨酯
制作
3D打印
复合材料
石墨烯
纳米技术
体素
下降(电信)
机械工程
计算机科学
人工智能
工程类
病理
替代医学
医学
作者
Jiayao Chen,Lihua Zhao,Kun Zhou
标识
DOI:10.1002/adma.202205909
摘要
Abstract 3D voxel printing enables the fabrication of parts with site‐specific materials and properties at voxel‐scale resolution, while the current research mainly focuses on the variations in mechanical properties and colors. In this work, the design and fabrication of voxelated conductive elastomers using Multi Jet Fusion 3D voxel printing actualized by a newly developed multifunctional agent (MA) are investigated. The MA, mainly consisting of carbon nanotubes and poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate, serves as an infrared‐absorbing colorant, a reinforcement, and a conductive filler simultaneously. By controlling the drop‐on‐demand dispensing of the agents on thermoplastic polyurethane powder, the electrical conductivity across a single printed part can be tailored over a wide range from 10−10 to 10−1 S cm−1 at a voxel resolution of ≈100 µm. Assembly‐free strain sensors comprising conductive sensing layers and insulating frames are fabricated to demonstrate the capability of the technique in manufacturing all‐printed wearable devices.
科研通智能强力驱动
Strongly Powered by AbleSci AI