光电探测器
量子点
红外线的
多激子产生
光电子学
材料科学
量子效率
带隙
雪崩光电二极管
比探测率
探测器
物理
暗电流
光学
作者
Byeongsu Kim,Sang Yeon Lee,Hyunseok Ko,Jihyung Lee,Hye-Jeong Song,Sungjun Cho,Yun Hoo Kim,Min-Ho Lee,Jung-Yong Lee
标识
DOI:10.1038/s41565-024-01831-x
摘要
Abstract Colloidal quantum dots (CQDs) are promising candidates for infrared photodetectors (IRPDs) with high detectivity (D*) and low-cost production. However, the incoherent hopping of charge carriers often causes low carrier mobility and inefficient charge extraction, leading to low detectivity in CQD-based IRPDs. Although photo-induced charge multiplication, in which high-energy photons create multiple electrons, is a viable alternative for enhancing the signal amplitude and detectivity, its capability is limited in IR detectors because of its susceptibility to thermal noise in low-bandgap materials. Herein, we present, for the first time, a pioneering architecture of a CQD-based IRPD that employs kinetically pumped charge multiplication. This is achieved by employing a thick CQD layer (> 540 nm) and subjecting it to a strong electric field. This configuration accelerates electrons to acquire kinetic energy, surpassing the bandgap of the CQD material, thereby initiating kinetically pumped charge multiplication. We also demonstrate that optimizing the dot-to-dot distance to approximately 4.1 nm yields superior device performance because of the tradeoff between increased impact ionization rates and diminished electron-hopping probabilities with increasing dot-to-dot distance. The optimal CQD-based IRPD exhibited a maximum multiplication gain of 85 and a peak detectivity (D*) of 1.4×1014 Jones at a wavelength of 940 nm.
科研通智能强力驱动
Strongly Powered by AbleSci AI