MECHANICAL PROPERTY OF PHENOLIC RESIN VIA MOLECULAR DYNAMICS USING A REACTIVE FORCE FIELD

作者
VAN GALLEGOS,JOSHUA KEMPPAINEN,Gregory M. Odegard
标识
DOI:10.12783/asc37/36372
摘要

During terrestrial atmospheric re-entry, aerospace vehicles can be subjected to temperatures greater than 1800 K which requires thermal insulation to protect the aircraft. Thermal protection systems (TPS) were developed to address this challenge with two goals in mind: (1) provide insulation to inner materials from high temperatures and (2) maintain low weight to reduce payload costs. One class of TPS materials commonly used as ablatives are carbon-carbon composites (CCCs), which consist of a carbon matrix embedded with carbon fillers. Common aerospace materials lose mechanical integrity at high temperatures, while CCCs continue to perform. The manufacturing process of CCCs is cyclic and begins with a net-shape uncured prepreg which is subjected to polymerization and carbonization via pyrolysis. Due to the shrinkage and mass loss associated with these processes, the resulting structure is subjected to several cycles of uncured resin re-impregnation, polymerization, and carbonization until a sufficiently dense structure is achieved. Carbon yield is defined as the mass remaining after carbonization divided by the mass before carbonization and is used as a metric for selecting carbon matrix precursors. A high carbon yield translates into fewer re-impregnation cycles, thus economizing the process. Phenolic resin is a common carbon matrix precursor material due to its relatively high carbon yield of 50-55%. The goal of this project is to establish molecular dynamics (MD) protocols for simulating the manufacturing process of a phenolic-derived carbon matrix. In the present work, an atomistic MD model of the polymerization of phenolic resin was simulated using a reactive force field. By using a well-known material system, resulting MD properties can be compared to experimental values for validation. Since the end goal is a carbonized product, a poly- merized phenolic structure was created using pre-polymerized monomers as the initial structures which are then crosslinked at high temperature (1000 K) via an openvalence approach. A total of 5 replicates were built to account for statistical variation. To keep track of the gelation behavior of the system, the extent of reaction is calculated using Carothers' equation for a trifunctional branching polycondensation reaction, as well as the percent mass of the largest cluster relative to the system mass. After obtaining a gelled structure, the system was equilibrated and subjected to uniaxial tensile simulations. True stress and true strain values from the tensile simulations were plotted to calculate Young's modulus (E) based on the slope of the initial linear portion. The average equilibrated mass density was found to be 1.24 g/cc, while average E was calculated as 3.60 GPa. These properties agree with the experimental values of a mass density of 1.2 – 1.25 g/cc and E of 2.36 – 4.83 GPa.

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
贪玩的秋柔的应助被风吹麦浪采纳,获得30
刚刚
极限001的应助被liu采纳,获得30
2秒前
得意忘言完成签到,获得积分10
2秒前
金克丝完成签到,获得积分10
3秒前
大气幻柏完成签到,获得积分10
3秒前
郑石发布了新的文献求助10
3秒前
3秒前
Skyline完成签到,获得积分10
4秒前
Sapphire发布了新的文献求助30
4秒前
jdl完成签到,获得积分10
6秒前
wzh完成签到,获得积分10
7秒前
oooaaa发布了新的文献求助10
8秒前
8秒前
清辉影的应助被MADAO采纳,获得30
8秒前
科研通AI6.3的应助被金克丝采纳,获得10
9秒前
mllll发布了新的文献求助10
9秒前
ldx完成签到,获得积分10
9秒前
秋风的应助被喂喂喂采纳,获得10
10秒前
10秒前
重要尔曼完成签到,获得积分10
11秒前
11秒前
12秒前
LL发布了新的文献求助10
12秒前
materialboy完成签到,获得积分10
13秒前
13秒前
zy发布了新的文献求助10
15秒前
16秒前
林晓完成签到 ,获得积分10
16秒前
nxdr发布了新的文献求助10
17秒前
denty发布了新的文献求助10
18秒前
zoom发布了新的文献求助10
18秒前
风吹麦浪的应助被幽默小白菜采纳,获得10
18秒前
19秒前
zy完成签到 ,获得积分10
19秒前
dengsangsang完成签到,获得积分10
21秒前
隐形曼青的应助被MADAO采纳,获得30
21秒前
文竹完成签到,获得积分20
21秒前
车干完成签到,获得积分10
22秒前
23秒前
24秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
八旗制度の研究 600
Boundaries and Bodhisattvas 500
高分子基功能界面水蒸发材料与应用研究 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8181892
求助须知:如何正确求助?哪些是违规求助? 9571628
关于积分的说明 21818984
捐赠科研通 7778258
什么是DOI,文献DOI怎么找? 3433556
关于科研通互助平台的介绍 2557720
邀请新用户注册赠送积分活动 2479621