材料科学
兴奋剂
掺杂剂
聚合物
导电聚合物
电解质
氧化还原
纳米技术
化学物理
无机化学
电极
光电子学
物理化学
化学
复合材料
冶金
作者
Ian E. Jacobs,Yue Lin,Yuxuan Huang,Xinglong Ren,Dimitrios Simatos,Chen Chen,Dion Tjhe,Martin Statz,Lianglun Lai,Peter A. Gilhooly‐Finn,William George Neal,Gabriele D’Avino,Vincent Lemaur,S. Fratini,David Beljonne,Joseph W. Strzalka,Christian B. Nielsen,Stephen H. Barlow,Seth R. Marder,Iain A. McCulloch
标识
DOI:10.1002/adma.202102988
摘要
Abstract Molecular doping—the use of redox‐active small molecules as dopants for organic semiconductors—has seen a surge in research interest driven by emerging applications in sensing, bioelectronics, and thermoelectrics. However, molecular doping carries with it several intrinsic problems stemming directly from the redox‐active character of these materials. A recent breakthrough was a doping technique based on ion‐exchange, which separates the redox and charge compensation steps of the doping process. Here, the equilibrium and kinetics of ion exchange doping in a model system, poly(2,5‐bis(3‐alkylthiophen‐2‐yl)thieno(3,2‐b)thiophene) (PBTTT) doped with FeCl3 and an ionic liquid, is studied, reaching conductivities in excess of 1000 S cm−1 and ion exchange efficiencies above 99%. Several factors that enable such high performance, including the choice of acetonitrile as the doping solvent, which largely eliminates electrolyte association effects and dramatically increases the doping strength of FeCl3, are demonstrated. In this high ion exchange efficiency regime, a simple connection between electrochemical doping and ion exchange is illustrated, and it is shown that the performance and stability of highly doped PBTTT is ultimately limited by intrinsically poor stability at high redox potential.
科研通智能强力驱动
Strongly Powered by AbleSci AI