Inclined loading of horizontal plate anchors in sand

The performance of plate anchors in sand, relative to clay, is not well understood, particularly for the more realistic case of an inclined load. This paper investigates the effect of load inclination on horizontal plate anchors in sand through centrifuge tests and numerical finite-element simulations. The centrifuge tests were performed on rectangular plate anchors in loose and dense sand, at shallow embedment depths with four different load inclinations. The experiments showed that the anchor capacity of horizontal plates increased progressively as the load inclination became progressively more horizontal, with anchor capacity under pure horizontal loading being approximately 1·8 times higher than that under pure vertical loading. These experimental observations were also replicated in finite-element simulations using a bounding surface plasticity model. Investigation of the underlying failure mechanisms and stress paths showed that the slip planes become longer and the mobilised lateral stresses increase as the load inclination becomes increasingly horizontal, which leads to higher anchor capacities. Finally, the anchor resistance factors from the numerical analyses were decoupled into vertical and horizontal components and represented as interaction diagrams, providing a basis for performing hand calculations of anchor capacity for a given embedment depth, load inclination and relative density.